08-22-2011 12:38 AM - edited 07-03-2021 08:36 PM
Hi all,
I have a customer with an ACS for Windows version 3.3. I know the ACS is End-of-support, but is anybody who know if I could do Authentication for a WLAN with a Controller 5508 Softwareversion 7.0.116.0 and how?
Kind regards
Holger
Solved! Go to Solution.
08-22-2011 01:00 AM
Release notes states that the ACS 4.2 is mandatory for WLC running 7.0.116
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp274399
3.3 is not supported..
Lemme know if this answered ur question and Please dont forget to rate the usefull posts!!
Regards
Surendra
08-22-2011 01:00 AM
Release notes states that the ACS 4.2 is mandatory for WLC running 7.0.116
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp274399
3.3 is not supported..
Lemme know if this answered ur question and Please dont forget to rate the usefull posts!!
Regards
Surendra
08-22-2011 02:26 AM
Hi Surendra,
the release notes told that ACS 4.2 or later is tested, but not that the version is mandatory. If you say that version 4.2 is mandatory I will accept this.
Regrads
Holger
08-22-2011 06:28 AM
few weeks back faced a EAP FAST issue on the ACS running 3.3 and WLC 7.0.116, finally upgraded the ACS to 4.2 and everything worked fine!!
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide