cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2044
Views
0
Helpful
4
Replies

Activate certain SSID on certain AP in WLC

kinwai
Level 1
Level 1

in current environment i have 3SSID , SSID_1, SSID_2 and SSID_3

most AP requires all 3 of them

certain AP in certain location such as in the lobby, i just need SSID_1

is this possible? any hint on this?

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame

Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thanks scott ! This will do the trick !

No problem and thanks for using the rating system!

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Scott Fella
Hall of Fame
Hall of Fame

Here is a good link

https://supportforums.cisco.com/docs/DOC-19033

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card