cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1445
Views
3
Helpful
16
Replies

add new AP in EWC

datin
Level 1
Level 1

how to add new Accest Point in EWC ?,

16 Replies 16

 

   - Use this method based on DHCP and considered standard :
                     https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R
VIP
VIP

1. Use DHCP not static IP.
2. All APs should be in same broadcast domain/VLAN as EWC then no config is required for discovery.
3. What model is the AP you are trying to add?
4. What software is currently installed on the AP you are trying to add?
5. Do you have TFTP server setup for the AP to download the correct software?

Review Cisco Networking for a $25 gift card