09-26-2018 04:31 PM - edited 07-05-2021 09:14 AM
Dears,
if i need to add another controller-WLC to existing one in the network to achieve high availability.
is this need a downtime (restarting the original controller) or not?
thanks
09-26-2018 05:00 PM
09-27-2018 06:48 AM
thanks for your response.
Should the two controllers have the same software version ?
09-27-2018 06:51 AM
Recommandation is to keep the same software version on both WLC else when AP will move from primary to secondary then all AP need to download /install the new software from WLC and it will lead to dwontime of 5-10 minutes.
Regards
Dont forget to rate helpful posts
09-26-2018 09:59 PM
additing to scott..
here are the guide to implement:
HA AP/Client SSO:
HA N+1 :
https://rscciew.wordpress.com/2014/06/07/n1-high-availability-configuration-on-cisco-2504wlc/
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide