05-02-2004 09:15 PM - edited 07-04-2021 09:36 AM
My scenario as follows:
Cisco Aironet AP (non IOS-350 series & IOS-1200 series)
ACS 3.2 appliance
Active Directory
How can I authenticate the administrators for booth non-IOS & IOS AP by the ACS 3.2?
Does non-IOS 350 series support RADIUS authentication? Or it should be upgraded to IOS?
What are the requirements to upgrade the non-IOS 350 series to be IOS?
Can I use the GUI for booth series using https not http?
Regards,
05-04-2004 05:30 AM
Hi,
you can access the IOS 350 with http or https. The config is simpler than the non-IOS software, I think.
When you use IOS to authenticate with ACS below is a short overview:
- create the access points as clients
Do the following in the IOS:
aaa new-model
aaa authentication login default tacacs local
tacacs-server host 1.1.1.1
tacacs-server key ANYKEY
line vty ...
login authen default
05-07-2004 10:19 PM
thanks for your reply
but how can i enable "https" for GUI interface??
and how to upgrade non-IOS 350 to IOS-350??
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide