Advise on C9120AXP and AIR-ANT2513P4M-NS/AIR-ANT2588P4M-NS

[Mkvts]

Hi,

I'm planning a new wireless deployment and want to use these 2 antennas:

AIR-ANT2588P4M-NS
AIR-ANT2513P4M-NS

Both have a higher gain then 6 dBi and from what I understooth and Cisco documentation I need to use the 9120AXP AP.
Now i'm confused on what kinda connectors the 9120AXP have. I cannot find a clear picture and information about the connectors.
Do i need to use the DART connector or does the 9120AXP have the same connectors as 9120AXE?

Is anybody familiar with these APs and antennas?

[jagan.chowdam]

The 9120AXE and 9120AXP models have a 4-port Smart Antenna (DART) connector. External antennas including the Self Identifying Antennas (SIA) can be connected to this Smart Antenna connector using the 4-port DART cable connector (AIR-CAB002-DART-R=). Both the 9120AXE and 9120AXP also support Smart antennas.

The 9120AXE (C9120AXE-x and C9120AXE-EWC-x) and 9120AXP models (C9120AXP-x and C9120AXP-EWC-x) support four external, dual-band RP-TNC connectors.

Refer: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9120ax/quick/guide/ap9120ax-getstart.html

Cisco 9120AXP is same as 9120AXE, except it is used for locations like stadium with high gain antennas (professional installation)

Jagan Chowdam

/**Pls rate useful responses**/

[srimal99]

@Mkvts  as @jagan.chowdam  9120AX come with 4 smart Antenna (Dart) Connectors. You can refer to following link for use the connector.
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/guide-c07-742311.html