cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bookmark
|
Subscribe
|
2156
Views
0
Helpful
5
Replies

AIR-AP-3802I-B-K9 Lightweight to Mobility Express Firmware conversion

gbwiersum
Level 1
Level 1

I'm trying to convert my 3802I from capwap to Mobility-Express. The problem is, Mobility-express isn't listed as a valid ap-type in the installed firmware.

gbwiersum_0-1725211400789.png

So when I try:

 

 

 

ap-type mobility-express tftp://192.168.1.3/D:\TFTP\AIR-AP3800-K9-ME-8-10-196-0.tar

 

 

 

obviously:

gbwiersum_1-1725211632589.png

 

Is there a good workaround? Have I done something completely wrong?

Here's the guide I'm following

Thanks

5 Replies 5

marce1000
Hall of Fame
Hall of Fame

 

  - You may need to do this via the console ; review this documentation too :
                             https://semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap/

   M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

I am using the console.

When I try to get-request the file from my server, the command fails because ap-type only accepts "capwap" and "workgroup-bridge" as valid arguments.

 

 - Then it looks to me that it is running an image type that is not capable of doing this,

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

 

 - Added : post the output of : 

          show version

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R
VIP
VIP

The AP must be running a very old version of software (before Mobility Express was supported).
Install the latest (AireOS compatible) CAPWAP image *before* trying to convert to Mobility Express.  It's best to do that anyway for a successful conversion.
https://software.cisco.com/download/home/286304536/type/286288051/release/15.3.3-JK11
Then https://software.cisco.com/download/home/286304536/type/286289839/release/8.10.196.0

Review Cisco Networking for a $25 gift card