Hello, I'm planning to replace the AC power source for our AIR-AP1572EAC-A-K9 AP's with PoE+ switches, specifically the WS-C2960X-24PS-L series. Documentation for the AP is not clear; here it states that PoE is supported:
Power Aironet 1570 Series Outdoor Access Points can be powered by AC, DC, power over cable (PoC), and Power over Ethernet (PoE). Table 10 shows the powering options for each model.
In the same document, UPoE is required
Power over Ethernet The AP1572EAC can be powered over the Ethernet connection. Power can be sourced directly from an appropriately powered Universal Power over Ethernet (UPoE) switch port or from the inline power injector listed in Table 12. Table 12. Power Injector for Use with PoE Part Number Description AIR-PWRINJ1500-2= 1520/1550/1570 Series Power Injector; for indoor environments only
It’s been about two and half years, since the launch of next generation Cisco Catalyst 9800 Wireless LAN Controllers that has the most deployment flexibility and runs the modular, scalable, highly reliable, open and programmable operating system, I...
Hi All, I have made this video for Cisco Pitch the Future Contest in Malaysia which talks about Wi-Fi 6 and EWC Demo. Please feel free to view the video below and please support me for this contest by giving the video a like as the Contest will end o...
On the Cisco Catalyst 9800 Series WLC, enabling/disabling the remote LAN (RLAN) ports on APs requires going into the configuration for each AP and manually enabling/disabling the ports. However, as the number of APs that need to have their RLAN...
It’s been a long road for our AireOS wireless controllers. In fact these products have been around Cisco in some form since 2005. As you may have heard, Cisco made the decision to End-of-Sale (EOS) these products last month.
That means that these AireOS ...