I just want to Know how many users can connect to AIR-CAP3602I-x-K9 at singel point of time.
This depends on a number of factors. As what Scott has mentioned, the rule-of-thumb is 25 clients per WAP. But this number can go up or down depending on the type of traffic you plan to push. If, for example, you're going to say you're pushing nothing but emails,HTTP/HTTPS, etc. then this number may as well go up to 35. However, if you plan to start pushing video then this number could potentially go down to 8 clients per WAP.
Now, take note that we are talking about 802.11a/n for video. If you bring into the picture 802.11b clients then you may as well don't bother trying.
Another thing is the type of ethernet uplink you are trying to do. I remembered reading someone trying to push 802.11n but using only a 2500 and his LAN switch is a non-gigethernet uplink to the WAP.
Table of Contents
Table of ContentsOverviewConnecting a Catalyst 9800 WLC to Cisco DNA Center ManuallyConnecting an AireOS WLC to Cisco DNA Center ManuallyCisco DNA Center Assurance Deployment Guide References
The purpose of this document...
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...