cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
913
Views
0
Helpful
2
Replies

AIR-CT2504-K9 upgradation & AP compactability

Hi,

 

We are planning to upgrade WLC (AIR-CT2504-K9) which is presently running on software version - (8.0.152.0). Below are the Access Points models which are presently registered on this WLC -

AIR-LAP1131AG-E-K9 & AIR-LAP1042N-E-K9

Please let me know which latest version will support mentioned Access Point models.

 

 

 

1 Accepted Solution

Accepted Solutions

Hi,

as per document,

 

your 1131's last support OS version is 8.0.152.0

1040 series's last support OS is 8.3.150.0

2504 controller supports up to version 8.5

 

rate and mark as answer, if this helps

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

2 Replies 2

Hi,

as per document,

 

your 1131's last support OS version is 8.0.152.0

1040 series's last support OS is 8.3.150.0

2504 controller supports up to version 8.5

 

rate and mark as answer, if this helps

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Haydn Andrews
VIP Alumni
VIP Alumni

For future reference this site has the compatibility of software to AP and WLC models

 

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html 

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Review Cisco Networking products for a $25 gift card