AIR-LAP1262N-A-K9

[Goku31]

Hello there.

I have this access point  AIR-LAP1262N-A-K9, and it is autonomous and i want to convert in lightweight but i can not find the ios. Please how can i download anywhere ? 

[Sandeep Choudhary]

You should ask your supplier from where you bought this AP.

Regards

Dont forget to rate helpful posts

[Goku31]

I don't have any contact with supplier. So i cant talk with him, i just want a firmware to convert in lightweight from autonomous. If have anyone please send to me.

[Kasun Bandara · Accepted solution]

this AP is too old to download OS from cisco. what is the file name of current OS in AP?

[Goku31]

Here it is the version.

[Sandeep Choudhary]

Hi,

This AP already have Lightweight image(K9W8). 

Regards

Dont forget to arte helpful posts

[Goku31]

Yes but it should open with GUI, because when i try to open with GUI appear this error 

[Sandeep Choudhary]

If you want to use it a standalone AP then you need to convert it to Autonomous mode and then you can configure it via GUI or cli.

Regards

Dont forget to rate helpful 

[Kasun Bandara]

use

https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

blog to identify exact file required for AP. as i noticed you can use 3500 AP IOS file which is ready available in cisco site.

https://software.cisco.com/download/home/283307699/type/280775090/release/15.3.3-JF15

you can try that file. but causes, i cannot guarantee file will support to 1260 also. i am guessing since both file names are same.

[jvalenzuelamx2020]

There was a site with a list of old IOS ready to donwlad,http://tfr.org/cisco-ios/wireless/... but it no longer works... if you find out where there is another one, let me know