03-18-2022 01:33 AM
Hello there.
I have this access point AIR-LAP1262N-A-K9, and it is autonomous and i want to convert in lightweight but i can not find the ios. Please how can i download anywhere ?
Solved! Go to Solution.
03-18-2022 03:09 AM
this AP is too old to download OS from cisco. what is the file name of current OS in AP?
03-18-2022 02:49 AM
You should ask your supplier from where you bought this AP.
Regards
Dont forget to rate helpful posts
03-18-2022 02:55 AM
I don't have any contact with supplier. So i cant talk with him, i just want a firmware to convert in lightweight from autonomous. If have anyone please send to me.
03-18-2022 03:09 AM
this AP is too old to download OS from cisco. what is the file name of current OS in AP?
03-18-2022 03:21 AM
Here it is the version.
03-18-2022 03:23 AM
Hi,
This AP already have Lightweight image(K9W8).
Regards
Dont forget to arte helpful posts
03-18-2022 03:28 AM
Yes but it should open with GUI, because when i try to open with GUI appear this error
03-18-2022 03:37 AM
If you want to use it a standalone AP then you need to convert it to Autonomous mode and then you can configure it via GUI or cli.
Regards
Dont forget to rate helpful
03-18-2022 03:51 AM
use
https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/
blog to identify exact file required for AP. as i noticed you can use 3500 AP IOS file which is ready available in cisco site.
https://software.cisco.com/download/home/283307699/type/280775090/release/15.3.3-JF15
you can try that file. but causes, i cannot guarantee file will support to 1260 also. i am guessing since both file names are same.
12-18-2023 10:09 PM
There was a site with a list of old IOS ready to donwlad,http://tfr.org/cisco-ios/wireless/... but it no longer works... if you find out where there is another one, let me know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide