AIR-PWRINJ-BLR1

[Mike Campbell]

Can we use a power injector from a 1410 series wireless bridge to replace a failed AIR-PWRINJ-BLR2 for a 1310 series bridge ? I know there is no console port on the BLR1.

[Amjad Abdullah]

It is 'possibe' if they provide same power. But I don't think they do. And even if they do, that is not supported scenario by cisco and if anything goes wron g cisco can not help you unless you use the proper devices. So it is always recommended to use the devices that cisco recommend even though other non-supported devices may work.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"