09-23-2013 04:33 AM - edited 07-04-2021 12:54 AM
Hi!
I'm having an issue with this Access Point.
I've configured this access point with WLC in mode FlexConnect with web authentication.
It's all right, i'm connecting with my PC in wireless, i open my web browser in windows, then the Access Point redirect me to External Web Authentication Page,
i put my credentials, and i'm redirected to my access point ( https:/1.1.1.1/login.html i accept the certificate) and then the Access Point redirect me to Internet.
I do this with my android phone, it's all right again.
I try to connect with iphone or ipad , i'm redirected to External Web Authentication Page, i put my credentials, and i'm redirected to https://1.1.1.1/login.html where the web browser don't ask me anything and i'm not redirected to Internet.
Have you any idea?
09-23-2013 05:31 AM
Well that is how the apple devices work. It opens up a small window where you login. After that you will see a success page and the you have to open up a browser on your own. You can disable the apple devices from opening up the small window, but the user then has to manually open a browser. Apple devices have the built in feature that detects if there is internet and then either opens the window for you to login or not.
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/wlan/config_wlan_chapter_010001.html
https://supportforums.cisco.com/docs/DOC-36523
Sent from Cisco Technical Support iPhone App
09-23-2013 06:46 AM
Thx you Scott, i understand what are you talking about, but my problem is different.
I try to explain..
I see the wireless network, i associate the iphone to this network, so i'm redirected to Login page,
as i use the "Apple Login" or i Open a Web Page .
In this page , that i reach with all devices i put my credentials, then i will be redirected with all devices
back to Access Point (https://1.1.1.1/login.html).
In this page i should be redirected to internet after Radius Authentication, but with Apple Devices this doesn't work.
This is thw WEB AUTHENTICATION from Cisco Documents.
09-23-2013 07:35 AM
Okay, so the user gets the portal page and enters the information. You then can see from the radius that the client is authenticated successfully (what are you using? ISE or NGS). If the radius successfully authenticates the user, then you should get the home page or the url that was initially used on the browser. You don't mention what code your running on the WLC as that might have some issue which TAC might help you find if that's a bug or not. I have ran into that issue with v7.2 or v7.3, but I can't remember.... it was a bug, but the WLC was hosting the guest portal. You have the guest portal on ISE or NGS, so you need to look at the logs to give you more info on what is going on.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-24-2013 12:54 AM
The system version of WLC is this: 7.2.110.0
I use ISE portal.. and you can tell me where i collect Logs?
If you fix the main post, i reply there!
Thx you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide