Aironet 1252 doesn't broadcast SSID and VLANs

[JOSE CHAUCA]

Best regards.

I have an autonomus AP Aironet 1252 (software version: 12.4(18a)JA1)

I configured 3 SSID and VLANs, but the AP doesn't broadcast SSID, the vlans are working fine because I tested configuring manually the hide SSID on laptops.

Also the AP broadcasts the SSID whe only one SSID is configured!!!

How I can do the AP to broadcast all SSIDs?

Thanks in advance.

[daviwatk]

From the command line of your AP.

Change each SSID as follows.  You want to turn off "guest-mode" and enable "mbssid" at each SSID.  Guest-mode will only broadcast one SSID, you must use mbssid  to allow all SSIDs to broadcast.

#config t

#dot11 ssid

#no guest-mode

#mbssid

Now from each radio

#int d0

#mbssid

#int d1

#mbssid

[Surendra BG · Accepted solution]

Hi,

Please chec kthe below Video..

https://supportforums.cisco.com/videos/2343

Regards

Surendra

[JOSE CHAUCA]

Thank you so much.

The wireless LAN is working fine now!

Regards

Jose