10-31-2013 11:50 AM - edited 07-04-2021 01:11 AM
I have 2 1310 wireless briges in a point to point configuration with the root bridge acting as my ACS server..
I am currently running Leap Authentication and with Wep encryption but would like to upgrade this to use Peap and AES if possible??
I'm wondering if anyone has upgraded their solution to this type of encryption?
thanks
10-31-2013 12:23 PM
What IOS version are you running ? 12.4(25d)JA is the last supported IOS version for this product. So you should go with that image.
If you are using AP as AAA server, then I think only EAP-FAST, LEAP & MAC authentication is supported. Not anything else.
Here is WGB (workgroup bridge) configuration with EAP-FAST & you can get an idea how to configure EAP-FAST if you choose to. (In your case you have to configure root bridge & non-root bridge in two respective AP)
http://mrncciew.com/2013/04/28/wgb-with-eap-fast/
HTH
Rasika
**** Pls rate all useful responses ****
10-31-2013 01:07 PM
Thanks Rasika,
i'm currently running c1310-k9w7-mx.123-8.JEA3
10-31-2013 01:44 PM
Yes definetly with the upgrade of your IOS on 1310 you wil be getting the desired feature.
softwrae that needs to be upgraded :-
12.4.25d-JA2 IOS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide