08-20-2019 07:27 AM - edited 07-05-2021 10:52 AM
Hi everyone.
recently we increased Internet speed up to 200 Mbps. through 5GHz Radio and LAN, I can get the 180 up/down the speed. but on 2.4GHz, still, it's 98 Up/Down.
does anyone have suggestions?
08-20-2019 08:37 AM
Hi @helpling
Your configuration looks fine, not sure if you are using channel bonding on 2.4 GHz, still, if you use bonding you will have an issue with your plan channels. I think this is a physical limitation on the 2.4 GHz band.
08-20-2019 09:09 AM
What device are you using to connect on to the 2.4 GHz?
08-20-2019 09:52 AM
I always follow "Cisco Wireless LAN Controller (WLC) Configuration Best Practices"
In general, Disable low data rate, use 20 MHz width, if you're using PSK then use WPA2 with AES-CCMP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide