10-04-2019 03:53 AM - edited 07-05-2021 11:05 AM
Buongiorno
sono nuovo del forum e grazie per essermi potuto iscrivermi.
Io ho un AP 2602 che mi e' stato regalato da un amico che lo ha smontato da uno stabile dove hanno montato dei modelli piu recenti,adesso io voglio collegarlo alla mia rete internet di casa ma ho cercato di resettarlo ma credo di non esserci riuscito in quanto,quando vado a collegarlo sul router trovo il suo indirizzo ip ma da broswer se lo chiamo non mi appare la schermata di accesso.Gentilmente mi aiutate? Potete spiegarmi come fare?
GRAZIE!
10-09-2019 05:30 AM
Ho lanciato il comando tar -xtract t ftp://10.0.0.2/ap3g2-k9w7-tar.153-3.JAB.tar flash:
ma su TFTP32 non parte l'estrazione del file,perche'? Guarda lo screenshot allegato.
GRAZIE!
10-09-2019 05:57 AM
You have disabled your Windows Firewall or any other Firewall software on your computer?
Also disable the wireless on the computer and only use wired while doing the transfer.
I'm not 100% sure if it should work, but can you ping 10.0.0.1?
10-09-2019 07:05 AM
Il Firewall e' disattivato pero'ho notato che disattivando il wifi e inserendo il cavo di rete nella porta ethernet del pc mi compare il triangolino giallo,perche? Guarda lo screenshot.
Il TFTP32 va settato qualcosa ? Quando lancio il comando da putty il file di estrazione parte in automatico su TFTP32?
AP 2602 non deve essere acceso insieme al tasto mode.Giusto?
10-09-2019 07:17 AM
10-09-2019 07:58 AM
10-09-2019 10:11 AM
Il pc e AP sono collegati direttamente ( il cavo esce dalla scheda di rete del pc e va su un alimentatore POE e da li al AP 2602 )
Nel pc quando il cavo di rete e' connesso si accendono una luce spia verde fissa e un'altra luce spia Arancione lampeggiante lenta,mentre lato AP non ci sono luci spia.
Ho provato anche l'accesso del TFTP32 da amministratore ma niente.
Ho provato a lanciare il caricamento del file e staccando il cavo di rete dal pc su PUTTY mi dice subito che
IP 10.0.0.2 non lo trova,quindi perche' non parte? Non so se possa mancare qualche impostazione su TFTP32
Tu cosa pensi ?
10-09-2019 11:54 PM
10-10-2019 02:16 AM
10-11-2019 12:22 AM
Buongiorno
Scusami se ieri non ti ho risposto ma sono stato occupato con altre cose,ma passiamo a noi:
Questa mattina ho fatto qualche prova con la solita procedura e ho notato che il file caricato su TFTP32 parte solamente se AP viene acceso con tasto MODE premuto per circa 15/20 secondi solamente che nell'estrazione leggo su PUTTY che qualche cosa non va a buon fine.( Non ho fatto screenshot pero' posso ripetere l'operazione e documentarla)
Mentre se eseguo la procedura solo accendendo AP ( Nessuna pressione tasto MODE ) non va.
Ma la scritta DPAA Set for Independent Mode non vuol dire che lui e' gia' Autonomo?
10-11-2019 01:03 AM
I have never seen the message DPAA Set for Independed Mode, but I don't think it's important.
If you use the Mode button, rename (or make a copy) the file to: ap3g2-k9w7-tar.default
10-11-2019 01:33 AM
Quindi devo cambiare in questo? ap: tar -xtract t ftp://10.0.0.2/ ap3g2-k9w7-tar.default flash:
e cambiare anche ap3g2-k9w7-tar.153-3.JF5.tar in ap3g2-k9w7-tar.default nella directory di TFTP32. Giusto?
Nel frattempo ho trovato in rete un file piu'recente ap3g2-k9w7-tar.153-3.JF5.tar va bene?
10-11-2019 01:56 AM
10-11-2019 03:13 AM
Se io uso il tasto MODE perche' non parte come in questo video?
https://www.youtube.com/watch?v=hnKMXs-8LKY
Nello screenshot allegato ( MODE Buton 15-20 sec ) perche' nella voce:
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default
al posto di 255.255.255.255 non dovrebbe esserci IP del server TFTP che nel mio caso e' 10.0.0.2
10-13-2019 11:52 PM
10-14-2019 12:59 AM
Buongiorno
Quale posso usare in alternativa a TFTP32 o 64 ?
Me ne puoi consigliare qualcuno tu?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide