01-17-2018 12:30 AM - edited 07-05-2021 08:07 AM
Hello, my company has purchased an Aironet AIR-AP2802E-E-K9C. My hardware vendor tells me that this model can be used without a controller. But the hardware is looking for a CAPWAP (discovery). I saw on the Cisco forum that some people so convert their device into stadalone, but now as soon as I want to download an image, I am asked for a contract. What should I do ?
The version is 8.2.151.0 when I type sh version. I am not an expert in Cisco
Thanks for your help.
Solved! Go to Solution.
01-26-2018 05:47 AM
You followed this here: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_0110.html
and afterwards the next chapter:
?
01-17-2018 03:18 AM
Carefully read the Cisco Security Advisory called "Multiple Vulnerabilities in Wi-Fi Protected Access and Wi-Fi Protected Access II" and scroll down to the "Customers Without Service Contracts" section. Read very, very carefully the first two paragraphs with emphasis on the second paragraph.
The process to convert from CAPWAP to Mobility Express can be found HERE.
Hope this helps.
Please don't forget to rate our useful posts.
01-17-2018 05:20 AM
01-17-2018 05:33 AM
Hello and thank you for your answer. On the AP it is written K9 and on the packaging board CISCO Prod # K9C Base P / N K9. I'm lost.
I asked my dealer to take the necessary steps with CIsco.
01-17-2018 05:40 AM
01-17-2018 05:46 AM
01-17-2018 05:53 AM
01-17-2018 06:05 AM
01-26-2018 05:31 AM
My dealer took over the K9. I ordered a K9C on another site. Its good. After the small configuration it tells me "config not synced to aps since no ap is present". It does not have a wireless network. I do not know what to do, I do not know much about Cisco. Help me please.
Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
User: Config not synced to APs
01-26-2018 05:47 AM
You followed this here: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_0110.html
and afterwards the next chapter:
?
02-06-2018 03:58 AM
Hello,
I received version 8.6 to deploy on my AIR-AP2802E ME. What is the command to type in order to upgrade my Mobility Express 8.3 access point to 8.6 Mobility Express. I already install the TFTP server. I find that the conversion command but it does not interest me.
Thank you very much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide