11-23-2020 11:24 AM - edited 07-05-2021 12:49 PM
Hi,
I tried to upgrade my 3802e to the last image (8.10.130.0) from 8.5.131.0.
TFTP works perfectly
In the predownload image status, I can see my AP 100 % completed.
It reboots automatically.
Perfect
After reboorting, I still have the same version in the Software update menu (8.5.131.0)
What I did wrong ?
Thanks in advance for your help.
11-23-2020 11:49 AM
what mode AP was before the upgrade. read the release notes :
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn810mr3.html#ap-wave2
11-23-2020 01:07 PM
11-23-2020 05:08 PM
11-25-2020 10:38 AM
I used the wireless lan controller app from my Aironet 3802e and updated the image 8.10.143.0 from the management/software update menu via a tftp server (transfer app in macos).
then i don't know if I updated the controller or the access point.
Result is that tftp predowload image is completed. My Aironet 3082e is rebooting but the update is still the 8.5.131.0 displayed in the software update menu.
12-01-2020 10:55 AM
11-24-2020 12:07 AM
Is your Parent Controller has the same version of Code? - you need to do that along with AP.
11-25-2020 10:39 AM
I only have an Aironet 3802e wifi box. Inside there is a controller and an Access point.
11-24-2020 12:28 AM
Normally direct upgrade is possible from 8.5.x to 8.10.130.0 version.
If you are not getting through then first upgrade to 8.8 version and then go for 8.10
Regards
Dont forget to rate helpful posts
11-25-2020 10:40 AM
Thanks for this info. Due to licence issue I can't download the 8.8. version. Is there a website where I can download it ? thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide