09-28-2005 10:40 AM - edited 07-04-2021 11:10 AM
Is it true "You cannot have a mixed environment of APs running VxWorks and IOS work with the BBSM"
09-29-2005 07:18 AM
The statement you make is true if you are using any vlans internal to the BBSM. There is an issue that is being worked related to vlans and the polling of the bridge mib in these devices. If you have no vlans a mix of vxworks and IOS Aps should be just fine.
09-29-2005 08:14 AM
Hi
Thank you for your response, so if I upgrade all my access points to IOS (which is about 50+) I will no longer have issue? DO you happen to know any bug ID regarding this?
Thanks.
09-29-2005 10:22 AM
I have never seen an issue with the APs running IOS. I would recommend using the packet version of the Dlls when you set them in network elements. No there is no bug at this point. We having been discussing it internally to see if it is a configuration issue or a bug.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide