cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
728
Views
0
Helpful
4
Replies

Alerts

vivek NAGAR
Level 1
Level 1

Hi Friends,

as of now we are getting on SNMP Trap on our HPopenview moitoirng system

below trap from WLC

ciscoLwappAAARadiusReqTimedOut i

NbsnAPIfDown 0x00 23 5d 0f 02 70 0 enable enable unknown access point name

can any one know about these trap.

Thanks

Vivek

4 Replies 4

Stephen Rodriguez
Cisco Employee
Cisco Employee

The WLC sent a request to the AAA server, and that request timed out.

You should be able to go and pull the MIBS for the WLC and load them to your OpenView server

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Hi Stephen,

for below alert

NbsnAPIfDown 0x00 23 5d 0e ff 80 0 enable enable unknown

and one more alert which continue coming

ciscoLwappApCrash [

what is that ????  when check on WLC and access point no issue observed.

we do same which you suggest.

thanks

Vivek

the AP interface went down.  If you have the OID, you can go to the below link:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=enhttp://www.cisco.com/web/go/mibs

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Sorry i am new about this can you explain more where i got OID

Review Cisco Networking for a $25 gift card