10-07-2021 05:19 AM
I had 5 APs on a 2504 Wireless Controller - they all lost connectivity and I cannot join them to the AP now.
At a loss for why this happened and how to fix it. Any help would be greatly appreciated. thanks
10-07-2021 05:50 AM
Please check the time on WLC and make sure its correct.
Also configure NTP server IP, from where WLC can update its time.
Regards
Dont forget to arte helpful posts
10-07-2021 03:36 PM
Post the complete output to the following commands:
10-07-2021 11:48 PM
- Check the logs on the controller when the AP's try to reconnect, also boot an AP and attach a console, post the output from the boot-process here.
M.
10-09-2021 05:51 AM
You don't mention what model of AP or version of software you're working with?
Have you carefully read the field notice https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63942.html and followed ALL the steps in the right order?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide