04-30-2013 08:04 PM - edited 07-04-2021 12:00 AM
Hello,
I have a cisco WLC 4402, i have a problem with people trying to log into wlc 4402 GUI console with wrong pass. Are there any ways that I can allow certain IP to go to or see the log in page of WLC? Thanks.
04-30-2013 11:01 PM
Hello.
That is not possible from WLC side on up to 7.0 version (not sure if that is changed in later 7.x versions).
What you can do is to create an access list somewhere in your wired infrastructure to restrict access to the WLCs IP address.
HTH
Amjad
p.s: even if the feature you mentioned is available, you'll be getting logs anyway that users are trying to access WLC from un-authorized IP.
Rating useful replies is more useful than saying "Thank you"
05-01-2013 06:37 AM
Hi Amjad,
I currently have core switch --> switch A ---> WLC 4402, as your suggestion in switch A, I should have an ACL which would allow only my ip to access the WLC management (https/port 443)? What are about other APs? will this ACL blocks all the APs?
05-01-2013 06:59 AM
You can also implement a CPU ACL to control access to the management interface.
Just be carful you write the ACL correctly or you could lock yourself out of the WLC.
Sent from Cisco Technical Support iPad App
05-01-2013 07:08 AM
I'm little confused here, this is my PC ip 10.10.255.15, if that's possible can you please give an example of a CPU ACL in this case? Thanks.
05-01-2013 07:12 AM
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide