12-30-2018 05:24 AM - edited 07-05-2021 09:38 AM
I've been asked to set up user credentials for a network I've recently acquired. I don't have access to a WLC, but I have managed to set up a local RADUIS server on one of the 1600 series AAP's. For all of this I'm using the web interface. On the local authenticator, I've entered each AP as a NAS and created a test user and a few MAC authentication only users. On the other AP's, I've entered the local authenticator as a RADIUS server with Authentication Port as 1812 and Accounting Port as 1813. I have the SSID set to Open Authentication with MAC Authentication or EAP and I have Web Authentication checked. The encryption is set for Mandatory WEP. The issue is I can't get a client device to connect to the network and route to the web authentication page. I know the AP has communication with the local RADIUS server because my MAC Authentication only users are authenticating with out issue, their state under the association tab is MAC-Associated. The client device's (a laptop in this case) state is Association processing. Any thoughts?
Thanks
Solved! Go to Solution.
01-03-2019 05:23 AM
01-03-2019 04:02 AM
01-03-2019 05:07 AM
Thanks for the reply.
I used this guide, https://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap9-localauth.html, to set up the RADUIS server on the ap. I'm by no means an IT professional, but it seems to be working based on the MAC only authentications working. My real issue seems to be figuring out how to set up web authentication via the ap. I will look into using an actual server for RADIUS, though.
Thanks!
01-03-2019 05:23 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide