AP 1562 in u-Boot mode

[m-gadaleta]

My AP is in u-boot mode. I need a .bin file executable from this mode to boot it in Mobility Express mode. Per esempio ap1g6-k9w8-mx.153-3.JF12.bin. Where can I download it?

[marce1000]

  - FYI : https://software.cisco.com/download/home/286290657/type/286289839/release/8.10.196.0

  M.

[m-gadaleta]

I can't find a valid .bin file.

[Rich R]

@m-gadaleta If you don't have a bootable partition (meaning you accidentally erased both partitions) then the only thing you can do is RMA the AP.

There is no package available to restore the flash partitions on a 1562 AP.  You cannot install the AP software from u-boot, it can only be installed after the AP has booted from a working partition.

Cisco has only published the u-boot recovery packages for the WiFi 6 (AX) AP models:
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9120axi-access-point/217537-repairing-c9120-c9115-access-points-from.html
There are no u-boot recovery packages for the Wave 2 AC APs (like the 1562) and the WiFi 6E and WiFi 7 APs.