04-02-2018 03:56 AM - edited 07-05-2021 08:27 AM
I am trying to register AP 1572EAC with WLC 2504, but it is not join. When i tried to ping wlc from AP, it can reachable.
04-02-2018 04:38 AM
Hi
Which WLC version?
Which is the AP country code?
Make sure date and time is correct.
Make sure you have license.
-If I helped you somehow, please, rate it as useful.-
04-02-2018 09:56 PM
04-02-2018 11:14 PM
1572EAC AP need minimum SW version on WLC is 8.0.135.0. So you must upgrade the WLC software first and then try again.
Here is the comptibility matrix:
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts
04-02-2018 11:11 PM - edited 04-02-2018 11:12 PM
If its the first mesh access-point you are adding on your WLC, you need to explicit allow those type of access-points to join the WLC. You can do this by adding the AP MAC address under "Security" -> "AAA" -> "AP Policies" > Add(1572 Ethernet MAC address)
Then your AP will register to WLC, once registered, you can change AP mode to Local.
Regards
Dontf orget to rate helpful posts
04-06-2018 10:06 PM
Cisco Aironet 1572eac outdoor access point is supported with WLC version 8.2.166 ??
04-08-2018 11:38 PM
YES it support 8.2.166.0 version on WLC.
Regards
Dont forget to rate helpful posts
04-09-2018 12:06 AM
Thank you Sir.
12-25-2018 07:42 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide