02-20-2024 10:53 AM
Hi poeple l got problems with my Accesspoint l try install Mobility Express on my accesspoint no scuess l try ping right ip didn work
02-20-2024 01:09 PM
Hello @lisavbedt ,
the procedure to convert a CAPWAP AP to a Mobility Express AP is relatively simple. I've done it a few times without any issues.
Here is the procedure to do the conversion: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html
Hope this helps.
02-20-2024 01:13 PM
l tried that steps but lf as can help me out that wil be great
02-20-2024 01:14 PM
And that page is hard read And What to do to exrpess mode
02-20-2024 10:34 AM
Have Alot of problems with acess point l try install mobility express but no sucess l watched video of tuturial but l cant install new software of AP Someone Explain to me
02-20-2024 01:15 PM
can you post the logs what image you using what is error you getting when you convert ME ?
02-20-2024 01:17 PM
Yes l treid ping but doesnt respond l try other way didn work aswel
02-20-2024 01:51 PM
Yes l treid ping but doesnt respond l try other way didn work aswel
that does answer our question, you need explain more and provide more evidence of logs. ?
02-20-2024 01:55 PM
Well l Watched video of how covert to mobility express but it didn mine says invaild marker
l did right Things to upgrade to mobility express but sill nothing And model is Ap2801i-b-k9 l dont of supported mobility express on this model
02-20-2024 02:19 PM
First of all, I'm not sure yor AP model is correct. According to Cisco documentation, the 2801i-b-k9 is not among the models for the 2800 series: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-2800-series-access-points/datasheet-c78-736497.html#Productspecifications
Second, the AP2802I-x-K9C or the AP2802E-x-K9C models can be configured as Mobility Express Master or Subordinate:
02-21-2024 07:21 AM
1. Provide the exact model number of your AP - taken from the label on the AP.
2. Advise what software the AP is currently running? Login to the AP and use "show version"
3. Advise exactly what software image and version you were trying to use for the upgrade and the exact commands you were using to do the conversion. If you got errors then quote the exact errors you got.
If you do not provide the detailed information we need then nobody here can help you work out what is going wrong.
02-22-2024 06:36 AM
AP Running Image : 17.9.3.154
02-22-2024 06:37 AM
And it doesnt ping to tftp l get errors
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide