01-13-2013 11:43 PM - edited 07-03-2021 11:20 PM
We have cisco wlc 2125 with 13 AP 1131g. All works good. But after power failure one AP can not join to controller, only reset help to recover connection AP to WLC. Additionally, we don't have access to rs-232 port on AP. In this moment on WLC we can see DISCOVERY request from AP and response from WLC to AP, but AP don't send JOIN to controller. Does anyone has the same issue as me ?
01-14-2013 01:18 AM
You can really only tell what is happening from the console port of the AP. other than that your just guessing. If a reset is what fixed it, just keep that in mind for that AP.
This doc might help though in troubleshooting
https://supportforums.cisco.com/docs/DOC-17826
Sent from Cisco Technical Support iPhone App
01-15-2013 11:40 PM
Any other controller is discoverable by the AP? It is possible that the AP joins another WLC!!
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide