09-04-2014 02:36 AM - edited 07-05-2021 01:29 AM
Hi
I know there are some ways for a AP to join a controller, option 43 and a DNS name on the controller.
Another way is on the Accesspoint is define the controller via:
capwap ap controller ip address 1.2.3.4
But the Access Point cant download the software before it ask for a new ip address, and lose the controller ip address configuration.
Is there any way to disable the lose of the ip controller address ?
Solved! Go to Solution.
09-04-2014 02:45 AM
Only these ways are there:
0 - broadcast
1 - configured
2 - OTAP
3 - dhcp server
4 - dns
1. Is your AP and WLC in same subnet ??
2. Try to create a DHCP pool on core switch for APs to get IP and also configure DHCP option 43.
Regards
09-04-2014 02:45 AM
Only these ways are there:
0 - broadcast
1 - configured
2 - OTAP
3 - dhcp server
4 - dns
1. Is your AP and WLC in same subnet ??
2. Try to create a DHCP pool on core switch for APs to get IP and also configure DHCP option 43.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide