05-01-2018 10:30 PM - edited 07-05-2021 08:34 AM
Hello there,
We plan to install AP3702 is it possible to be install as a autonomous AP. What would be the procedure to start the implementation.
Thank you
Best Regards
Solved! Go to Solution.
05-02-2018 12:59 AM
Yes its possible to configure it as autonomous AP.
1. chekc if AP has lighteight image or autonomous image !!
2. if it has LAP image then convert it to autonomus mode.
How to convert:
https://damn.technology/convert-cisco-lightweight-ap-autonomous
3. How to configure:
https://mrncciew.com/2012/10/24/multiple-ssid-config-on-autonomous-ap/
Regards
Dont forget to rate helpful posts
05-02-2018 12:59 AM
Yes its possible to configure it as autonomous AP.
1. chekc if AP has lighteight image or autonomous image !!
2. if it has LAP image then convert it to autonomus mode.
How to convert:
https://damn.technology/convert-cisco-lightweight-ap-autonomous
3. How to configure:
https://mrncciew.com/2012/10/24/multiple-ssid-config-on-autonomous-ap/
Regards
Dont forget to rate helpful posts
05-03-2018 09:46 PM
05-03-2018 10:20 PM
paste the manual link.....about master AP.
05-04-2018 04:18 AM
05-11-2018 12:27 AM
Thank you for the information I'm working still on the subject. I'm not able to ping the computer from the AP or viseversa. The ip for the computer is 10.10.10.1 for the AP is 10.10.10.102 subnet 255.255.255.0 and the gateway is 10.10.10.1 to point at the ftp and it's not working. Any help would be greatly appreciated.
Thank you
05-11-2018 01:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide