cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1124
Views
5
Helpful
5
Replies

AP disassociated from Controller

saranratnam
Frequent Visitor
Frequent Visitor

Hi All, There are few APs disassociating from controller intermittently. Wondering what is the error logs below referring to. Seeking for any experts opinion here. Thank you.

 

 

*spamApTask7: Jun 05 14:14:50.636: %LWAPP-3-AP_DEL: [PA]spam_lrad.c:6088 2c:01:b5:c8:70:80: Entry deleted for AP: 192.168.200.75 (5264) reason : AP Message Timeout.
*spamApTask3: Jun 05 14:14:50.636: %CAPWAP-3-DTLS_CLOSED_ERR: [PA]capwap_ac_sm.c:7521 2c:01:b5:c8:70:80: DTLS connection closed forAP 192:168:200:75 (5264), Controller: 192:168:202:4 (5246) AP Message Timeout
*spamApTask3: Jun 05 14:14:50.635: %CAPWAP-3-MAX_RETRANSMISSIONS_REACHED: [PA]capwap_ac_sm.c:8073 Max retransmissions reached on AP(2c:01:b5:c8:70:80),message (CAPWAP_CONFIGURATION_UPDATE_REQUEST
),number of pending messages(2)

5 Replies 5

check your connectivity between WLC and AP. seems like some connectivity issue arise. 

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Leo Laohoo
Hall of Fame
Hall of Fame

What firmware is this?

Software Version: 8.10.151.0
Field Recovery Version: 8.3.143.0

Remote into the AP and look at the logs.   

When the AP gets kicked out from the WLC, post the complete output to the WLC command of "show ap join stats detailed 2c:01:b5:c8:70:80".

Reboot the controller.

Review Cisco Networking for a $25 gift card