cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2010
Views
15
Helpful
3
Replies

AP fails to join controller

Naderi
Level 1
Level 1

Hello everyone,

I have WLC with 50 AP's and just bought some new AP's (AIR-AP1852I-Z-K9) but not joining or discovery by my cisco controller.

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.5.151.0
RTOS Version..................................... 8.5.151.0




AP :
cisco AIR-AP1852I-Z-K9 ARMv7 Processor rev 0 (v7l) with 997268/508800K bytes of memory.

AP Running Image : 8.5.140.0
Primary Boot Image : 8.5.140.0
Backup Boot Image : 0.0.0.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
2 Gigabit Ethernet interfaces
2 802.11 Radios

NSS FW version : NSS.AK.C.CS-3-fix2


Part Number : 0-0000-00
PCA Assembly Number : 074-13149-04
PCA Revision Number : 01
Top Revision Number : A0
Product/Model Number : AIR-AP1852I-Z-K9


Bootloader Version............................... 8.3.15.96
Emergency Image Version.......................... 8.3.102.0




I have SSH access to these AP's.

Regards.

 

1 Accepted Solution

Accepted Solutions
3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Awesome! it's fixed. Thanks

Scott Fella
Hall of Fame
Hall of Fame
You need to covert them from Mobility Express to lightweight. Just search that and you will find instructions.
-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: