cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1002
Views
15
Helpful
3
Replies
Naderi
Beginner

AP fails to join controller

Hello everyone,

I have WLC with 50 AP's and just bought some new AP's (AIR-AP1852I-Z-K9) but not joining or discovery by my cisco controller.

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.5.151.0
RTOS Version..................................... 8.5.151.0




AP :
cisco AIR-AP1852I-Z-K9 ARMv7 Processor rev 0 (v7l) with 997268/508800K bytes of memory.

AP Running Image : 8.5.140.0
Primary Boot Image : 8.5.140.0
Backup Boot Image : 0.0.0.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
2 Gigabit Ethernet interfaces
2 802.11 Radios

NSS FW version : NSS.AK.C.CS-3-fix2


Part Number : 0-0000-00
PCA Assembly Number : 074-13149-04
PCA Revision Number : 01
Top Revision Number : A0
Product/Model Number : AIR-AP1852I-Z-K9


Bootloader Version............................... 8.3.15.96
Emergency Image Version.......................... 8.3.102.0




I have SSH access to these AP's.

Regards.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Leo Laohoo
VIP Community Legend
3 REPLIES 3
Leo Laohoo
VIP Community Legend

Awesome! it's fixed. Thanks

Scott Fella
Hall of Fame Guru

You need to covert them from Mobility Express to lightweight. Just search that and you will find instructions.
-Scott
*** Please rate helpful posts ***
Create
Recognize Your Peers
Content for Community-Ad