06-16-2009 05:52 AM - edited 07-03-2021 05:43 PM
I'm in the process of creating 3 AP Groups for a wireless deployment, and the corresponding dynamic interfaces for each vlan. With regards the single SSID that's been created, when I select this the interface drop-down list contains the 3 dynamic interfaces that have been created along with the management interface. Which interface needs to be selected for this option? I was under the impression this needed to be a dynamic interface, or is this configuration negated as I'm using AP Groups?
I've had a look through the documentation, and this area of the configuration isn't mentioned.
TIA
Solved! Go to Solution.
06-16-2009 06:02 AM
Hi Dan,
I created an extensive CBT on AP groups. This may help you ...
http://www.my80211.com/cisco-labs/2009/3/23/cisco-ap-group-nugget.html
Please rate this post if you find it helpful ... Thanks
06-16-2009 06:02 AM
Hi Dan,
I created an extensive CBT on AP groups. This may help you ...
http://www.my80211.com/cisco-labs/2009/3/23/cisco-ap-group-nugget.html
Please rate this post if you find it helpful ... Thanks
06-16-2009 06:29 AM
Very cool George!+5 points for this nice addition.
Cheers!
Rob
06-16-2009 06:37 AM
Thanks Rob ... I have a bunch more i will be posting. Its just hard finding the time editing ... :)
06-17-2009 03:56 AM
Great CBT. Answered my question as well.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide