10-31-2023 03:54 PM
Deal All,
I had recently set an 3802 AP as a Monitor AP to troubleshooting signal issues.
I can ping the monitor AP but could not webpage to it to check the logs it capture.
is there any alternative to check out the logs ? from the 5508 WLC ?
Any help are much appreciated.
Thanks
Q
11-04-2023 07:18 AM
The clean air data collected by the monitor mode AP is displayed on the WLC not the AP.
It can also be used and displayed by Prime or CMX.
Refer to the config guide: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/radio_resource_management.html
11-06-2023 09:22 PM
Thank you Rich.
This document is awesome.
(ChatGPT told the wrong information ie webpage/CLI to the AP instead of WLC )
11-07-2023 04:58 AM - edited 11-07-2023 04:59 AM
Remember ChatGPT is still "learning". I've seen it confuse technical information from multiple different vendors on numerous occasions to come up with answers which don't apply to Cisco at all.
Often a carefully composed web search which takes you directly to the vendor's own documentation can give you a more relevant answer.
I'm not saying don't use ChatGPT (it will get better with time) but always cross-check the answers it gives you, and tell it when it has given you the wrong answer - that helps the model to learn.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide