AP manager, managment interfaces and dynamic interface in the same segment?

[filiberto.aguirre]

Hi,

Is it possible to set the ap-manager, managment interface and one dynamic interface (for internal user) in the same segment?

I have tried but I haven't could.

currently I have set untagged vlan in ap-manager and managment interface on WLC.

regards

[Leo Laohoo · Accepted solution]

It is recommended to put your management and AP Manager in the same subnet.  I don't know why you want to put your Dynamic interface in the same subnet.  It can't be done but it's not recommendable.

[filiberto.aguirre]

Hi Leo,

End user request dynamic interface in the same segment as ap-manager and manager interface.

regards,

[nikhilcherian · Accepted solution]

You can map the vlan to the management interface so that the clients will get the Ip address from the management interface subnet

Thanks

NikhiL

[filiberto.aguirre]

Hi Nikhil,

thanks for your recomendation. it works now !!!

I really appreciate your time..of course 5 + for you.

regards

[George Stefanick]

nikhilcherian wrote:
You can map the vlan to the management interface so that the clients will get the Ip address from the management interface subnet
Thanks
NikhiL

Thats a security risk. Why would you want to land your wireless client on the same vlan as your controllers? I wouldn't advise that.

[nikhilcherian]

Hi George,

Please let me know what are the security risk involved in assigning the management interface for a WLAN

Thanks

NikhiL