AP name display wrong

[Jian Zheng]

Hello All,

I hava a WLC5508 with many OE602I APs,I find when i open the link MONITOR>Statistics>AP Join,the "AP Name" is not correct with the real ap's name,for example,the correct ap's name is AP028-617,but it display ap name is "AP028-617B9.0870[Ethernat MAC ec:c8:82:b9:08:70]",actually the name form is ap name+Ethernat MAC,

so i want to know,how does i do can correct the ap's real name thanks.

[Scott Fella · Accepted solution]

Have you tried to clear the stats?  

-Scott

[Jian Zheng]

Hi Scott,

Yes,i did.But the name always display ap name+mac,so i don't how to correct it.

[Scott Fella]

Might be a bug with the code your running. Have seen that before, but don't recall what code. 

-Scott

[Jian Zheng]

the current WLC5508 version is 7.4.121.0,the version before upgrading is 7.2.103.0,it never happen when wlc5508 run the old version.

[Scott Fella]

That might be the version. I can see if I have any clients still on that code, but v7.4.130.0 has fixed for issues on the code your running. 

-Scott

[Jian Zheng]

But the fact is not as you said,i capture a image,please check it.

[Scott Fella]

That is most likely a cosmetic bug. You must be running a TAC version of 7.4, so you would need to upgrade if you want that fixed. Nothing you can change on the WLC will fix that. You can always open a TAC case and have them tell you what code to upgrade to. 

-Scott

[Jian Zheng]

Ok,thanks for your help.