10-06-2020 02:54 AM - edited 07-05-2021 12:36 PM
Please i need assistance, i have some AIR-LAP1131G-A-K9 that is not joining the controller. I'm currently using Cisco4400 series controller.
Note: the AP's are getting IP address via DHCP as the controller and AP's are on same subnet. from the AP, i can reach the controller's AP-manager IP and Management IP. see below error message from the AP.
*Mar 1 00:00:48.706: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:54.706: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not receive the Join response
*Mar 1 00:00:54.706: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Mar 1 00:00:59.715: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
*Mar 1 00:00:59.715: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Mar 1 00:01:04.724: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
*Mar 1 00:01:04.724: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Mar 1 00:01:10.733: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
*Mar 1 00:01:10.733: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
Thanks as i look forward to a solution
Solved! Go to Solution.
10-06-2020 04:14 AM
Thanks @Leo Laohoo some of the AP's came up after setting the time to a recent earlier time when the certificates were still valid.
i will proceed to upgrade software if this will fix completely
10-06-2020 03:16 AM
10-06-2020 04:14 AM
Thanks @Leo Laohoo some of the AP's came up after setting the time to a recent earlier time when the certificates were still valid.
i will proceed to upgrade software if this will fix completely
10-06-2020 08:02 AM
- The particular ap-model is very old and will usually not be compatible with later software releases, switch to modern ap model is adviced
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide