cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
571
Views
0
Helpful
3
Replies

AP XOR Dual Band AIR-AP28021-E-K9

DEV1389
Level 1
Level 1

Hello Team, 

On Cisco Prime Infra we can see XOR type in Radio Type , What will be the purpose of that and how we can compare with other radio types. Secondly if I want to change their Radio Type of WLC , the below mentioned menu is blacked out. Can anyone explain about it. With Regads

DEV

DEV1389_0-1663249874387.png

DEV1389_1-1663250022567.png

 

 

 

3 Replies 3

marce1000
VIP
VIP

 

  - FYI : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-3/configuration_guide/b_163_consolidated_3850_cg/b_163_consolidated_3850_cg_chapter_01010100.pdf

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R
VIP
VIP

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_RRM_White_Paper/fra.html
https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/802-11ac-solution/at-a-glance-c45-737165.html
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810/radio_resource_management.html#info_fra

 

Arshad Safrulla
VIP Alumni
VIP Alumni

XOR radio means it can be software configurable to work either in 2.4 or 5 Ghz band. I haven't worked on AireOS WLC for some time now, but as I remember you need to set the radio tole assignment to manual, before changing the antenna band.

There are lot of pre-requisites required to get it working properly in a production environment, proper site survey is mandatory before you convert them to 5GHz. Make sure that you read the documents shared by @Rich R and do extensive planning and testing before converting them to 5GHz.

Review Cisco Networking for a $25 gift card