08-19-2004 06:15 AM - edited 07-04-2021 09:54 AM
Hello, I'm new here.
We have a AP1100 set with wep 40bit, and nothing special, other then the defaults. The dhcp ip's, are not being re-issued, when we disconnect from the AP.
Our network flows like this
T-1 --> 2610 router --> PIX515
The pix has two two interfaces internal.
PIX515 --> outside 192.168.0.2
PIX515 --> inside 192.168.5.1
PIX515 --> wifi 192.168.7.1
AP1100 is set static as 192.168.7.2
DHCPD in the PIX is as follows:
dhcpd address 192.168.7.3-192.168.7.50 wifi
dhcpd dns 192.168.5.24
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable wifi
Another issue, is the client pc attached to the AP, is not getting to the outside.
Thanks in advance.
08-19-2004 03:16 PM
I have client-AP1100-PIX515 and I am getting exactly the same problem. Client just does not get IP address from DHCP server in PIX515. IT has nothing to do with encryption or anything.If I reset AP1100, it always works.I had several correspondence with several Cisco engineers but no resolution.
I have also tried several windows options (zero config.,) and different radios 11b,mixed,11a..
Radio side always works but Network test fails and client drops to default 169.X.X.X address until I reload AP1100.
Serhat
08-20-2004 07:24 AM
This is good to know, that I am not so air-heady...lol
Thanks for the reply. hopefully someone will help get this resolved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide