09-24-2003 07:32 AM - edited 07-04-2021 09:02 AM
I have a number of AP1200's installed which were passing a DHCP allocated address to wireless clients using the Primary SSID (open).
I now want to manage the AP's from the wired-side only. I have set up a trunk on the 3350 switch using VLAN_MAN as the Native vlan and also trunking VLAN_Guest (where dhcp resides). On the AP1200 i have set Vlan_Man as the native vlan ,enabled this, added vlan_Guest and enabled it.8021Q is on and the AP trunking is on "Hybrid". I have mapped the primary SSID to vlan_Guest. I have given the AP (eth0) a static address from the management subnet. But now i cannot get the clients an IP address from the DHCP server?
Can anyone see what i have missed?
thanks
J.
an
09-30-2003 10:37 AM
The following is the administration guide for AP1200 my be this might give you better idea,
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/convtool/index.htm
10-16-2003 05:36 AM
If you could post some of your bridging config of the ap vlans someone may be able to see what may be missing. You might want to refer to section 13-9 for some examples of the vlan interfaces in the ap.
bernie
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide