08-04-2016 05:34 AM - edited 07-05-2021 05:34 AM
Hello I have a problem to join a 1702i AP to the 5520 controller. I have attached the debug capwap and the console output of the AP.
On the Controller runs the newest SW Release 8.3.102
Has anyone an idea whats the problem?
Thanks for your help
08-04-2016 05:45 AM
Unknown AP type. Using Controller Version!!!
08-04-2016 05:50 AM
Hi Leo
I saw this bug, and I installed the newest (fixed) version 8.3.102. But it doesn't work
08-04-2016 06:02 AM
which country did you configure on WLC ?
Make sure the time is set properly on the WLC and also make sure the country code for the APs are set on the WLC.
Regards
08-04-2016 06:03 AM
Hi Sandeep
On the controller I configured CH - Switzerland and the AP is AIR-CAP1702I-E-K9 that should be o.k.
08-04-2016 06:15 AM
yes regulatory domain is ok.
Did you set the time correctly ? also try to reboot WLC!!!
if still fail then use any other software...
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide