AP2702i unable to print using Bonjour-Airprint services in FlexConnect mode

[Quintin.Mayo]

Hello,

We got the Bonjour service working when using FlexConnect with some of our AP devices and clients on same Vlan at the same site. We discovered that when the printer is connected to our Cisco Aironet 2702i AP, that Bonjour does not work but when the printer is connected to our 1702i, it does work.  The WLC and AP information is below. Any assistance would be greatly appreciated.

WLC model: 5508

IOS image/Firmware version 8.0.133.0

AP model:AIR-CAP2702I-B-K9

IOS Version - 15.3(3)JA8$

Mini IOS Version - 8.2.105.100

Boot Version - 15.2.4.5

[patoberli]

8.0 software and the 2700 AP is a fairly bad idea, I suggest to upgrade to the latest 8.2.

In any case, I think you hit CSCus71140, which is fixed in 8.0.140.0:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80mr4.html