cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
978
Views
5
Helpful
3
Replies

AP2802I-S Not Update OS

longnh2010
Level 1
Level 1

Hi all,
I have AP 2802I S device, I am having software upgrade problem:
Current OS version : 8.3.143
I want to update to 8.5.135
But when I use the following commands it still fails to upgrade:
    setenv serverip 169.254.59.11
    setenv ipaddr 169.254.79.11
    saveenv
    tftp 169.254.59.11 ap3g3....tar
    boot
after running it is still at version 8.3.143

Thank 

3 Replies 3

Sandeep Choudhary
VIP Alumni
VIP Alumni

paste the Output of this command:

 

sh version

 

Regards

Dont forget to rate helpful posts

Have you selected the correct Partition to boo the AP? 

 

printenv BOOT  <<< Check the current configuration
setenv BOOT <part1 part2="">  <<< Change to another partition
saveenv  <<< Save configuration
boot  <<< Reload the AP

 

-CJ

 

/** Please rate useful responses **/

Can I suggest using a non APIPA IP address (169.254.x.x)

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card