11-15-2019 12:45 AM - edited 07-05-2021 11:19 AM
Hi,
We recently purchased brand new 10 units of Cisco 9115AXP and 1 unit of Cisco 3504 Wireless controller.
The issue is, some of the Apple laptop (both MacBook Air and Macbook Pro) users couldn't see the SSID and if they see and connect, the connection is intermittent.
It works for a while and then auto-disconnects. After that, if we try to connect, it doesnt connect at all.
Then, we have to turn wifi OFF and then wait for a while and then it connects. Sometimes, if it still doesnt connect then we have to restart the laptop.
This is super frustrating as we have around 10-15 users impacted with this issue.
Some of the mac's are on MacOS Catalina and some of them are still on MacOS Mojave.
We tried talking to Cisco support but they didnt helped and asked to update Wireless drivers. I have never seen Wireless drivers update for Apple laptops ever.
Appreciate if you experts can give me some lead that where we might be missing out.
Thanks
11-15-2019 12:52 AM
Best regards,
Chris
11-21-2019 01:17 AM
11-15-2019 03:59 AM
11-21-2019 01:18 AM
11-15-2019 03:32 PM
09-11-2020 06:51 AM
Hi, I am having similar issues on MacBook Pro with the Cisco 9100 series AP. My users intermittent connectivity. My issue is that users will drop during their Webex, Zoom or Team's meeting. A bit strange as audio and video will continue to stream, but audio and video will not "upload" and pings to gateway and 8.8.8.8 would stop. However, user can still hear and see the video from others on the video conference call.
09-11-2020 10:07 AM
03-03-2021 06:55 AM
We are hitting this bug: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw07292/?rfs=iqvred
I've had a TAC case open for two months now, and just now getting around to narrowing it down.
07-05-2022 01:16 PM
Anyone has information about the bug below, I'm getting this message
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw07292/?rfs=iqvred
You are not entitled to access bug: CSCvw07292
07-05-2022 04:19 PM
04-21-2021 01:51 PM
Hey Chet - I have hit this exact same issue. Did you ever find a fix for it? Please let me know. i have a TAC case open but they dont' know. Thanks
09-15-2020 10:37 PM
I have similar issues with production environmet running 17.3.1ES01 on Windows 10 machines. Windows freeze for some seconds and drops connection, and after 3 minutes it reconnects again. But I have notice the same in a couple of iPads as well.
From user point-of-view is more noticiable when on a remote meeting, but it always use to happen close to the re-auth timer defined on the WLAN so we have raised that timer to 15h.
I have tested many Intel drivers and that doesn't solve the issue.
The symptom I've observeed is the device losing its IP address and sending 7 DHCP Requests, and then restarting the process and sending DHCP Discoveries. After that time it start to receive the DHCP Offers, with the last one been the ACK'ed.
Opened a TAC case and we are investigating on the many AP catures, OTA and Win10 traces.
If that is the same behaviour, I will share our findings.
HTH
-Jesus
*** Please Rate Helpful Responses ***
12-03-2020 09:12 AM
We are having the same issue. We are running 8504 on ver 8.10.121.0 - clients complain and notice it during zoom video calls. We have turned off 2.4GHz as much as we can and created a 5GHz ssid with same results. We have asked all of our Mac clients to be sure that they are upgraded to ver 14.2
We notice for Zoom uses they use UDP/8801. We are wondering if the controller and AP do UDP Flood Protection?
12-04-2020 04:15 AM
I was suffering that issues when running the AP code included on that AireOS version (and same also on IOS-XE 16.12) and it was a config issue with FT and PMF. Unfortunately solving the issue for Apple devices impacted some android devices. I don't remember exactly the bug ID.
The recommendation is to move forward to 8.10.130 or newest 8.10.142.
HTH
-Jesus
*** Please Rate Helpful Responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide