03-30-2015 09:55 AM - edited 07-05-2021 02:49 AM
Hi Experts ,
We are having 5508 WLC with code of 7.0.98.218 . We are facing reauthentication issue for Apple MAC clients during roaming. They are prompting for credentials again. Wheras remaining clients and all roaming without any issues.
Kindly suggest on this
03-30-2015 10:06 AM
Hello,
Apple OS X deoesn't support 802.11r or OKC. Its to be expected when roaming with a MAC. iOS on the other hand supports 802.11r.
03-30-2015 10:08 AM
Is there any workaround option available for the same?
03-30-2015 02:05 PM
It's how apple handles their wireless.
03-30-2015 08:29 PM
I agree with George:) The only other thing you can try is to upgrade to the latest v7.0.x
-Scott
03-30-2015 10:08 PM
I have referred the below link and it says , upgrading the apple to 10.9.4 will resolve the roaming issue,
http://www.experts-exchange.com/Networking/Wireless/Q_28389889.html
03-30-2015 10:41 PM
I can't read the entire thread. Give it a shot and report back. Last known testing advance security roaming wasn't supported other than sticky key.
03-31-2015 05:46 AM
we have tried with 10.9.5 clients , but still it gets disconnected . But in the Apple support site they have mentioned clients after 6.0 version supports FT and PMKID caching .
https://support.apple.com/en-in/HT202628
03-31-2015 06:39 AM
Have you upgraded the controller code? Has this always been an issue or just started happening? Can you post your show wlan <wlan id> that the apple devices connect to?
-Scott
03-31-2015 06:51 AM
We just noticed this issue now only . And there were no Mac clients previously. As of now we havent upgraded the code of WLC . We will upgrade and tell the status soon
03-31-2015 06:56 AM
Post your wlan config... there might be a configuration change that is required.
-Scott
03-31-2015 08:39 AM
Scott -- intersted in knowing your thought process. Apple OS X doesn't support security roaming. How will the infrastructure help ?
03-31-2015 08:47 AM
I have implemented many schools that are 100% Apple and seeing that they are not experiencing issues with roaming makes me think its a configuration issue. I say this, because in environments with specific end devices, I have different things I know works with those devices and might not work with others. You can say its a work around or device specific settings, but with code and NIC device/firmware, these can change.
-Scott
03-31-2015 08:55 AM
But i think his question was about 802.1X roaming. Do you agree or do you know anything about OS X supporting OKC or 802.11r ?
03-31-2015 08:58 AM
What caught my attention is when the OP mentioned,"We are facing reauthentication issue for Apple MAC clients during roaming. They are prompting for credentials again. Wheras remaining clients and all roaming without any issues."
They shouldn't be prompted to login again.
-Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide