cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1380
Views
0
Helpful
3
Replies

applying proxy in WLAN controller

TECH-JEFF
Level 1
Level 1

Hi, we have a wireless controller 2500 series and 10 AP's inside the controller's GUI, I can't find the section where I can point the controller in a proxy server so that it hasa certain security filters especially for users browsing the internet.

Thanks

Jeff

Jefferson Co
1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

You don't configure the controller to have a proxy server, it's not going to browse the Internet. 

 

For the clients you could return the proxy settings via DHCP option? Or just tell your proxy to always listen to the wireless VLAN, so long as it is in the path to the internet. 

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

You don't configure the controller to have a proxy server, it's not going to browse the Internet. 

 

For the clients you could return the proxy settings via DHCP option? Or just tell your proxy to always listen to the wireless VLAN, so long as it is in the path to the internet. 

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Thanks Stephen, I did direct the users using our DHCP server, in DHCP configure server options to use a wpad, then they're no running on a proxy.

Thanks

Jeff

Jefferson Co

Saurav Lodh
Level 7
Level 7

you cannot configure such web proxies or web filters for users

Review Cisco Networking for a $25 gift card