Hi all
I want to configure AccessPoint to connect Weighing machines authenticate through the AAA server.the username is the MAC add of the machines and what shoud be the password.
The AP already has some configuration
dot11 ssid C4ABCD3_V60
vlan 60
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 15315F280B222A770B67112D1B0645 !
"username xxx password xxx (
username xxx autocommand exit
username xxx password xxx
username xxx xxxx
username xxx autocommand exit
Please help
Sudeesh S
