Authentication 9800-CL for web portal (admin access)

[ryan14]

Hi,

I have setup radius auth for login to my WLC 9800-CL and it works for SSH but not the web gui login. Is there something special I need to do?

Current config:

aaa authentication login default group my-server local

Also, what is interesting is if I remove the default list and try to use a custom name, it does not work for ssh or http.

Config

aaa authentication login my_name group my-server local

[balaji.bandi · Accepted solution]

admin user come with WLC always use local authentication as per i know) but you can create admin equivalent right users and authenticate again radius.

here is an example :

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214490-configure-radius-and-tacacs-for-gui-and.html

[ryan14]

Thanks that did it. 

Here are the commands for future ref:

paolo-9800(config)#ip http authentication aaa login-authentication radAutheMethod
paolo-9800(config)#ip http authentication aaa exec-authorization radAuthzMethod

[balaji.bandi]

Glad that was helpfull and you able to resolve the issue.